Gloop Firmware 1.2.0 is available now. We also have Gloops back in stock in our shop and kits available at Thonk. Get the Firmware here
Change log
Version 1.2.0
Features:
- Pan can now be a CV Target to allow pan control via CV
- For text lists, such as CV Targets, which you scroll through with the encoder can now be reset to the first option by pressing the corresponding encoder
- Separating mono and stereo effects. The ‘EFF’ option is now named ‘MEFF’ and only applies to the mono effects (delay and reverb) which can only be applied to a single channel (A or B). All other effects such as bit crush, tape saturation, are stereo, so apply to both channels.
- Separate Tape Age ‘AGE’ into ‘HISS’ (tape hiss) and ‘AGE’ (random dropouts), moved ‘DEGR’ (loop degrade into the Effects 3 page).
- Holding down the clear button for 2 second will clear the loop but not the state of the play heads (position, size, speed etc), you must hold for an additional 2 seconds (4 seconds total) to clear those). Previously holding for 2 seconds cleared the buffer and reset the playheads.
Bug fixes:
- Fixed issue where Audio In level was not respected when overdubbing
Leave a Reply